108
Hours of Work
March 2023
Project Date
12,000 Sq m
Surface Area
Steel Structure
Apply on
Hempafire Pro 400 - Pyrolite 15
Material
About 5-Star Hotel, Ras Al Khaimah
Al Ibtikar Al Hadeeth Technical Works is a leading fireproofing company in the UAE, specializing in the application of intumescent paint and cementitious fireproofing. One of their notable projects was the Poland Pavilion at Expo 2020 Dubai, which had a steel surface area of 11,000 square meters. To ensure its fire safety, the team used water-based intumescent coatings, specifically Sherwin-Williams Phoenix 370-90 and Phoenix 370-60. These intumescent paints, along with other intumescent paint ingredients, work by swelling up and creating a thick, insulating layer that protects the steel from the heat of a fire. The project was completed in 2020 and had a fire rating of up to 120 minutes, thanks to the fire retardant intumescent coating. Sherwin-Williams Phoenix 370-60 and 370-90 data sheets were consulted to ensure the highest quality of application. Al Ibtikar Al Hadeeth Technical Works takes pride in their work, providing industrial fireproofing and intumescent coatings that are vital for passive fire protection in the UAE. They offer a range of services, including intumescent paint, cementitious fireproofing, cable and duct coating, and fire retardant paint.
Fire Proofing Materiel: Hempafire Pro 400
Hempafire Pro 400 is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is optimized for R90, R120 and for in-shop and on-site applications.
- Very competitive loadings resulting in reduced paint consumption and less coats to apply. One product for most common steel sections to reduce complexity application and specification. It has been approved and 3rd party certified according to EN13381-8 and BS 476-21. It has ETA with CE mark and ApplusFire approvals. Ease of application and smooth surface contributes to provide excellent cosmetic finish to steel. Can be applied up to 1600 micron [63 mils] dry film thickness per coat, thus providing the required protection in less coats. 12 months weather resistant without topcoat provided that coating is sufficiently dried, applied according the Application Instructions and not exposed to condensation, running or pooling water. Environmental Product Declaration with third-party certification available (Type III EPD, acc. to ISO 14025, EN 15804). Product can contribute to EPD credits for LEED and BREEAM projects. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.
- As intumescent fire protection for structural steel in interior and exterior conditions, up to C4 conditions (ISO 12944-2). Suitable for I section beams, H columns, hollow sections and cellular beams. As a repair and touch-up coating for damaged areas of freshly applied Hempafire Pro 400.
Fire Proofing Materiel: Carboline Pyrolite 15
Pyrolite 15 A 15 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.
- Durable cementitious formulation
- Noncombustible
- Can be injected with Accelerator A-20 for fast set and increased yield (optional)
- Asbestos-free – complies with EPA and OSHA regulations.
108
Hours of Work
March 2023
Project Date
12,000 Sq m
Surface Area
Steel Structure
Apply on
Hempafire Pro 400
Material
Pyrolite 15
Material
