384
Hours of Work
March 2024
Project Date
1,470 Sq m
Surface Area
Steel Structure
Apply on
Hempafire Pro 400
Material
Prayer hall at Cleveland clinic Abu Dhabi
Working inside an operating hospital campus meant careful scheduling, clean application and minimal disruption to staff and patients.
For the prayer hall at Cleveland Clinic Abu Dhabi on Al Maryah Island, Abu Dhabi, Ibtikar applied Hempafire Pro 400 intumescent coating to 1,470 m² of structural steel, completing the scope in March 2024. Each stage, from blast cleaning and priming to final thickness readings, was recorded for the consultant and Civil Defence submission.
Fire Proofing Materiel: Hempafire Pro 400
Hempafire Pro 400 is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is optimized for R90, R120 and for in-shop and on-site applications.
- Very competitive loadings resulting in reduced paint consumption and less coats to apply. One product for most common steel sections to reduce complexity application and specification. It has been approved and 3rd party certified according to EN13381-8 and BS 476-21. It has ETA with CE mark and ApplusFire approvals. Ease of application and smooth surface contributes to provide excellent cosmetic finish to steel. Can be applied up to 1600 micron [63 mils] dry film thickness per coat, thus providing the required protection in less coats. 12 months weather resistant without topcoat provided that coating is sufficiently dried, applied according the Application Instructions and not exposed to condensation, running or pooling water. Environmental Product Declaration with third-party certification available (Type III EPD, acc. to ISO 14025, EN 15804). Product can contribute to EPD credits for LEED and BREEAM projects. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.
- As intumescent fire protection for structural steel in interior and exterior conditions, up to C4 conditions (ISO 12944-2). Suitable for I section beams, H columns, hollow sections and cellular beams. As a repair and touch-up coating for damaged areas of freshly applied Hempafire Pro 400.
384
Hours of Work
March 2024
Project Date
1,470 Sq m
Surface Area
Steel Structure
Apply on
Hempafire Pro 400
Material
Latest Projects
CWT-SML LogisticsOctober 3, 2026 - 12:30 pm- Eaton Middle East Head OfficeOctober 1, 2026 - 12:30 pm
- Abu Dhabi Food HubJanuary 3, 2026 - 7:55 am
