Phoenix™ 370-90

Fire Proofing Materiel:

Phoenix™ 370-90

Phoenix™ 370-90
A single component, water-based, thin-film, intumescent fire protection coating.

Phoenix 370-90 is a single component water-based TCEP-free thin-film intumescent coating for fire protection of structural steelwork.

Reach out to use our Data Sheet search to find the latest TDS and SDS content

  • Provides up to 120 minutes fire resistance
  • Application to structural steel hollow and I-sections
  • Highly competitive loadings
  • Easy application properties

  • Phoenix Manufacturing Ltd.

Phoenix™ 370-60

Fire Proofing Materiel:

Phoenix™ 370-60

Phoenix™ 370-60

A single component, thin-film, intumescent fire protection coating.

Phoenix 370-60 is a single component water-based TCEP-free thin-film intumescent coating for fire protection of structural steelwork.

Reach out to use our Data Sheet search to find the latest TDS and SDS content

  • Provides up to 90 minutes fire resistance
  • Application to structural steel hollow and I-sections
  • Highly competitive loadings
  • Easy application properties

  • Phoenix Manufacturing Ltd.

SC801 Nullifire

Fire Proofing Materiel:

Nullifire SC801 Intumescent Steel Coating

SC801 Nullifire

Nullifire SC801 Intumescent Steel Coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC801 contains no substances of very high concern.

  • Water-based intumescent coating suitable for internal use on structural steelwork for up to 120 minute fire resistance.
  • Easy to apply product for greater efficency on site with improved smooth matt finish.
  • Compatible with a wide range of primers and topcoats.
  • Very low VOC.
  • Optifire®+ unique traceability identifier.
  • Certifire CF5365.

  • Nullifire SC801 provides up to 120 minutes fire resistance to ‘I’ section beams, columns, hollow section columns and cellular beams. Nullifire SC801 can be used on steel, cast iron and galvanised steel.
  • Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application.
  • Safety data sheet must be read and understood before use.

  • Nullifire – Passive Fire Protection Solutions Including Fire Stopping Products and Intumescent Steel Coatings.

SC802 Nullifire

Fire Proofing Materiel:

Nullifire SC802 Intumescent Steel Coating

SC802 Nullifire

Nullifire SC802 Intumescent steel coating is a very low VOC, borate free, APEO free, water based, thin film intumescent coating for the protection of structural steelwork. SC802 contains no substances of very high concern.

  • Water based intumescent coating suitable for internal use on structural steelwork for up to 60 minutes fire resistance.
  • “Next generation” product – with greater efficiency on site.
  • Compatible with a full range of Nullifire primers and Topcoats.
  • Very low VOC.
  • Optifire®+ unique traceability identifier.
  • Certifire CF5420.

  • Nullifire SC802 provides up to 60 minutes fire resistance to ‘I’ section beams, columns, hollow section columns and cellular beams. Limited 90-minute protection is also available. SC802 can be used on steel, cast iron and galvanised steel.

    Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application.

    Safety data sheet must be read and understood before use.

  • Nullifire – Passive Fire Protection Solutions Including Fire Stopping Products and Intumescent Steel Coatings.

SC803 Nullifire

Fire Proofing Materiel:

Nullifire SC803 Intumescent Steel Coating

SC803 Nullifire

Nullifire SC803 Intumescent Steel Coating is an ultra low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork, optimised to 60 minutes fire resistance. SC803 contains no substances of very high concern.

  • Ultra Low VOC.
  • Market leading loadings.
  • Compatible with a wide range of Nullifire primers and Topcoats.
  • Easy to apply, with excellent aesthetics.
  • Optifire+® unique traceability identifier.
  • CE ETA 20/1210.
  • Emissions dans l’air interieur A+.
  • AGBB.
  • DGNB Navigator – 52P9A3

  • Nullifire SC803 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 90 minute protection is also available. SC803 can be used on steel, cast iron and galvanised steel.

    Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application.

    Safety data sheet must be read and understood before use.

  • Nullifire – Passive Fire Protection Solutions Including Fire Stopping Products and Intumescent Steel Coatings.

SC804 Nullifire

Fire Proofing Materiel:

Nullifire SC804 Intumescent Steel Coating

SC804 Nullifire

Nullifire SC804 Intumescent steel coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC804 contains no substances of very high concern.

  • Ultra Low VOC.
  • Competitive loadings.
  • Compatible with a wide range of primers and topcoats.
  • Easy to apply, with excellent aesthetics.
  • Optifire®+ unique traceability identifier.
  • Certifire CF5929.
  • 3 months without topcoat once fully dried (see Environmental Resistance section)

  • Nullifire SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 120 minutes protection is also available. SC804 can be used on steel, cast iron and galvanised steel.

    Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application.

    Safety data sheet must be read and understood before use.

  • Nullifire – Passive Fire Protection Solutions Including Fire Stopping Products and Intumescent Steel Coatings.

Fire Proofing Materiel:

Carbothane 137HS

Carbothane 137 HS is a fast-drying, high build, two component polyurethane coating which exhibits excellent dry times and handling characteristics required by Original Equipment Manufacturers. Has excellent UV resistance and good corrosion resistance in direct to metal applications for C1 to C3 environments, over primers for C4 to C5 environments.

  • Fast-drying formulation
  • High build polyurethane coating
  • Two-component system
  • Excellent dry times and handling
  • Ideal for OEM (Original Equipment Manufacturer) applications

  • Nullifire – Passive Fire Protection Solutions Including Fire Stopping Products and Intumescent Steel Coatings.

Carboline Pyrolite 15

Fire Proofing Materiel:

Carboline Pyrolite 15

Carboline Pyrolite 15

A 15 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.

  • Durable cementitious formulation
  • Noncombustible
  • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
  • Asbestos-free – complies with EPA and OSHA regulations.
  • Mineral Wool free – no airborne fibers.
  • Styrene free – no toxic decomposition gases.
  • Economical – Maintains project on budget.
  • Design flexibility with over 40 UL designs.

  • Carboline – Pyrolite 15

HEMPAFIRE OPTIMA 500

Fire Proofing Materiel:

Hempafire Optima 500

HEMPAFIRE OPTIMA 500

Hempafire Optima 500 is a very low VOC, one-component waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires. It has been optimized for On-site applications at R120. Applications in shop and/or R180 may be possible depending on the project.

Fast-Drying, High-Performance Fireproofing Coating – Certified Up to 180 Minutes

Maximize efficiency with our advanced passive fire protection (PFP) solution—designed for high DFT per coat, fast drying, and fewer application layers. Certified to EN 13381-8 (up to 120 minutes) and BS 476 (up to 180 minutes) with ApplusFire, ETA approval, and CE marking.

One product covers most steel sections, simplifying design and application. It delivers a smooth finish with excellent aesthetics. Features a Type III EPD (ISO 14025, EN 15804), supporting LEED and BREEAM credits. Complies with EU VOC Directive 2004/42/EC.

Trusted by Ibtikar Fire Proofing—leading fireproofing experts in the UAE and GCC.

Intumescent Fire Protection for Structural Steel – Internal Use up to C3

High-performance fireproofing for structural steel in internal environments up to C3 (ISO 12944). Ideal for I-beams, H-columns, hollow sections, and cellular beams. Also suitable as a repair and touch-up coat for damaged areas of freshly applied Hempafire Optima 500.

  • Hempel – Hempafire Optima 500

HEMPAFIRE OPTIMA 500

Fire Proofing Materiel:

Hempafire Pro 315

HEMPAFIRE OPTIMA 500

Hempafire Pro 315 is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is optimized for R30 & R60 and for in-shop and on-site applications. Fire protection at R90 may be possible depending on the project.

High-Efficiency Fireproofing Coating – Certified & Fast-Drying

Offers low paint consumption, fast drying, and fewer coats with up to 1600 microns DFT per coat. Approved to EN 13381-8, BS 476-21, and AS 4100 with ETA, CE mark, Certifire, and ApplusFire.

Suitable for most steel sections with a smooth, aesthetic finish. Weather resistant for 12 months without topcoat under proper conditions. Features a Type III EPD and supports LEED/BREEAM credits. Complies with EU VOC Directive 2004/42/EC.

Intumescent Fire Protection for Steel – Interior & Exterior Use

Fire protection for structural steel in interior and exterior environments, up to Type X (EAD 350402 / EN 16623) and C4 conditions (ISO 12944-2). Ideal for I-beams, H-columns, hollow sections, and cellular beams. Also used for touch-up and repair of Hempafire Pro 315 applications.

  • Hempel – Hempafire Optima 500

HEMPAFIRE OPTIMA 500

Fire Proofing Materiel:

Hempafire Pro 400

HEMPAFIRE OPTIMA 500

Hempafire Pro 400 is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is optimized for R90, R120 and for in-shop and on-site applications.

Hempafire Pro 400 – High‑Efficiency Intumescent Coating

Slash paint use with competitive loadings and up to 1,600 µm (63 mils) DFT per coat, reducing coats while delivering a smooth, premium finish on all common steel sections. Fully certified to EN 13381‑8 and BS 476‑21 with ETA/CE mark and ApplusFire approvals, it withstands 12 months weathering without a topcoat. Backed by a Type III EPD for LEED/BREEAM credits and compliant with EU VOC Directive 2004/42/EC.

  •  As intumescent fire protection for structural steel in interior and exterior conditions, up to C4 conditions (ISO 12944-2). Suitable for I section beams, H columns, hollow sections and cellular beams. As a repair and touch-up coating for damaged areas of freshly applied Hempafire Pro 400.

  • Hempel – Hempafire Optima 500

HEMPAFIRE OPTIMA 500

Fire Proofing Materiel:

Hempathane Fast Dry 55750

HEMPAFIRE OPTIMA 500

Hempathane Fast Dry 55750 is a 2-component polyurethane paint. Cured with aliphatic isocyanates. Good gloss retention and colour stability. Contains zinc phosphate.

  • Hempathane Fast Dry 55750 is recommended as a high-build solution for protecting steel structures, in compliance with VOC regulations. The product may be specified as a one-coat direct-to-metal system in corrosive environments classified as C2 and C3. It may also be applied directly on galvanised steel. Hempathane Fast Dry 55750 can also be used as an undercoated intermediate coat or topcoat within the system.

  • Hempel – Hempafire Optima 500

HEMPAFIRE OPTIMA 500

Fire Proofing Materiel:

Hempathane Topcoat 55210

HEMPAFIRE OPTIMA 500

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

  • For severely corrosive atmospheric environment. The minimum temperature for curing is -10°C [14°F]. Glossy with good gloss and colour retention.

  • Hempathane Topcoat 55210 is recommended as a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where colour fastness and gloss retention are required.

  • Hempel – Hempafire Optima 500

Jotun SteelMaster 600WF

Fire Proofing Materiel:

Jotun SteelMaster 600WF

Jotun SteelMaster 600WF

Jotun SteelMaster 600WF is a waterborne intumescent coating and specially formulated to offer 60 minutes sustainable fire protection for structural steel applications without the need for excessive coats. This makes it the most cost-effective fire protector for safeguarding the integrity of steel structures in fire situations. It is suitable for steels exposed to internal environments up to C3.

  • Fire protection coatings Building – interior
  • Intumescent coatings – cellulosic fire
  • Interior steel protection coatings – buildings

  • Engineered for a better environment
  • The most competitive waterborne fire protection product
  • Waterborne
  • Ideal for cost-effectively lowering VOC output

  • Jotun Paints – SteelMaster 600WF

Jotun SteelMaster 1200WF

Fire Proofing Materiel:

Jotun SteelMaster 1200WF

Jotun SteelMaster 1200WF

Jotun SteelMaster 1200WF is the most efficient thin-film waterborne intumescent coating for 120 minutes fire protection of structural steel exposed to interior environments. It is ideal for structural steel exposed to a wide range of corrosive environments. SteelMaster 1200WF is low VOC, HAPs free, and has a low environmental impact. It is easy to apply with airless spray for quicker project completion.

  • Fire protection coatings Building – interior
  • Intumescent coatings – cellulosic fire
  • Interior steel protection coatings – buildings

  • Low thickness required
  • HAPs free
  • Low VOC, low environmental impact
  • Increases productivity
  • Ready to use, easy airless spray application
  • Quicker project completion

  • Jotun Paints – SteelMaster 1200WF

PPG SteelGuard 801

Fire Proofing Materiel:

PPG STEELGUARD 801

PPG SteelGuard 801

PPG STEELGUARD 801 is a One component thin-film solvent-borne intumescent coating for fire protection of structural steelwork

  • Provides up to 120 minutes protection from cellulosic fires
  • Fast-drying, providing short handling times
  • Off-site or on-site application
  • Up to 1000 µm (40.0 mils) DFT in a single coat
  • Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required
  • Weather resistant up to 12 months without topcoat provided the coating has been applied in accordance with INFORMATION SHEET 1222 and is not subject to running or pooling water, high humidity or immersion conditions
  • Tested and assessed to EN 13381-8, BS 476-20/21 and Factory Mutual Class number 4970
  • CE marked product, ETA 22/0048
  • Assessed to ETAG 018-2 for all durability classifications

  • PPG – STEELGUARD 801

LUCO-BOVIA 279

Fire Proofing Materiel:

LUCO LLC – BOVIA 279

LUCO-BOVIA 279

BOVIA 279 is a medium density, exterior grade, heavy duty, cementitious fireproofing material ideal for construction buildings.

This passive fireproofing system can provide various hours of fire protection, that meets design specification of UL (Underwriters Laboratories Inc.) standard 263 for  commercial, residential and other construction buildings.

Developed through extensive research, BOVIA 279  provides remarkable physical properties that promote high quality and prolonged durability.

  • A limited number of products are able to endure the environmental conditions of construction building as well as “UL 263”.
  • BOVIA 279 has been developed through fine-tuned chemistry that provides extreme fire protection, resistant to damage, user-friendly application, and capacity to withstand various climate conditions.
  • BOVIA 279 can be spray applied with wide a range of conventional plaster pumping equipment along with paddle mixers and most continuous mixers.
  • Low water consumption
  • Low hydration heat
  • Low drying shrinkage
  • Low crack
  • High long-term strength
  • High bond strength

  • LUCO LLC – BOVIA 279

ISOLATEK Type 300

Fire Proofing Materiel:

ISOLATEK Type 300

ISOLATEK Type 300

CAFCO 300 / ISOLATEK Type 300 is the most innovative, widely specified and used commercial density, Wet Mix Spray-Applied Fire Resistive Material (SFRM) in the world.

CAFCO 300 / ISOLATEK Type 300 is a Gypsum- based formulation that offers the most cost effective fire resistance performance per unit thickness of any commercial SFRM in the world.

The thermal performance advantages of CAFCO 300 / ISOLATEK Type 300 results in reduced installed costs over any commercial density Wet Spray fire protection material in the industry. It also provides industry leading physical performance and application efficiencies that are unsurpassed.

  • Meets or exceeds all major fire protection specifications for Commercial structures including BS476: Parts 20 & 21, EN1338-1: Parts 3 & 4, ANSI/ UL 263, ASTM E119, CAN/ULC-S101.
  • Provides up to 4 hour fire resistance ratings.
  • Its additional family of products (CAFCO 300 ES / ISOLATEK Type 300 ES and CAFCO 300 SB / ISOLATEK Type 300 SB) provides specific benefits such as eliminating the need for daily priming and flushing out of lines, and easily identified tint for retrofit applications.
  • Offers the most cost effective fire resistance performance per unit thickness of any commercial density SFRM in the world.
  • Exceeds industry in-place physical performance standards.
  • Worldwide manufacturing facilities ensure timely availability.
  • Offers LEED building credits for recycled content.

  • ISOLATEK INTERNATIONAL  – CAFCO 300 / ISOLATEK Type 300 i

Akzonobel Interchar 212

Fire Proofing Materiel:

Akzonobel Interchar 212

Akzonobel Interchar 212

Solvent-free Interchar 212 is a high build, robust, two component modified epoxy intumescent providing damage resistant fire and corrosion protection for the most demanding construction projects. Interchar 212 has excellent mechanical and physical properties, all backed up by rigorous third party testing and approvals.

  • This robust coating can be applied in the factory, which means that your steel components can be brought to the construction site and assembled there with complete fire protection. Interchar 212 is approved for pulp fires. This makes your process planning easier. Our extensive testing and approvals justify the trust you place in us. International Paint stands for high quality fire protection.
  • 100% solids and therefore an extremely low VOC content contribute to the environmental compatibility of the building.
  • Independently tested for impact and blast resistance.
  • Approved to numerous fire safety standards.
  • Tested for flame spread, smoke generation and toxicity.
  • Can be used with many top coatings and colors, resulting in a wide range of design options.
  • Highly durable – robust product suitable for off-site processing as an alternative to on-site processing.
  • User-friendly as it is low-odour, thick-layered and quick-drying.
  • Almost no water absorption.

  • AkzoNobel – Interchar 212

MVL DC68

Fire Proofing Materiel:

MVL DC68

MVL DC68

 MVL Firestop is a well-known leader in Dubai with an extended reputation for supplying projects with DC68 Fire Protection Spray  and other Fire resistant coatings around the United Arab Emirates, The Middle East, and North Africa.  We understand the importance of fire safety; therefore, we ensure that our clients receive high- DC68 Fire Protection Spray manufactured following international standards.

  • MVL DC68 Product Data Sheet
  • MVL DC68 Material Safety Data Sheet

  • Interior furniture and synthetic fabrics are the number one contributing fac- tors to fire spread and smoke generation today.
  • Spray to Protect DC 68: is a new water based fire proofing spray that is a Non Toxic, Hypoallergenic, colorless and odorless formula that can be used on any water absorbent fabric or material*.
  • DC 68 Spray to Protect: retards fire and prevents the spread of flame over the treated area. DC 68 reduces smoke generation which increases visibility and the time to escape a fire situation, smoke is the leading cause of death in fires and using DC 68 significantly increases survivability.
  • DC 68 Spray to Protect: highly effective when applied to Curtains, Drapes, Carpets and Rugs, Upholstery, Decorations, Paper Products, Sleeping Bags, Mattresses, Wall Paper & Coverings, Aprons, Boots, Table Cloths, or any Water Absorbent Fabric*.
  • DC68 Spay to Protect: will not affect look, feel or ventilation qualities of most materials treated, however it is recommended to test a small area before applying to entire surface

  • MVL Firestop – DC68 Fire Protection Spray

1,200

Hours of Work

September 2024

Project Date

22,000 Sq m

Surface Area

Steel Structure

Apply on

Nullifire SC802

Material

Nullifire SC804

Material

Call Us