Hours of Work
Project Date
Surface Area
Apply on
Material
About M4 TRADING INDUSTRIAL FACILITY
Al Ibtikar Al Hadeeth Technical Works is a leading fireproofing company in the UAE, specializing in the application of intumescent paint and cementitious fireproofing. One of their notable projects was the Poland Pavilion at Expo 2020 Dubai, which had a steel surface area of 11,000 square meters. To ensure its fire safety, the team used water-based intumescent coatings, specifically Sherwin-Williams Phoenix 370-90 and Phoenix 370-60. These intumescent paints, along with other intumescent paint ingredients, work by swelling up and creating a thick, insulating layer that protects the steel from the heat of a fire. The project was completed in 2020 and had a fire rating of up to 120 minutes, thanks to the fire retardant intumescent coating. Sherwin-Williams Phoenix 370-60 and 370-90 data sheets were consulted to ensure the highest quality of application. Al Ibtikar Al Hadeeth Technical Works takes pride in their work, providing industrial fireproofing and intumescent coatings that are vital for passive fire protection in the UAE. They offer a range of services, including intumescent paint, cementitious fireproofing, cable and duct coating, and fire retardant paint.
Fire Proofing Materiel: Nullifire SC802 Intumescent Steel Coating
Nullifire SC802 Intumescent steel coating is a very low VOC, borate free, APEO free, water based, thin film intumescent coating for the protection of structural steelwork. SC802 contains no substances of very high concern.
- Water based intumescent coating suitable for internal use on structural steelwork for up to 60 minutes fire resistance.
- “Next generation” product – with greater efficiency on site.
- Compatible with a full range of Nullifire primers and Topcoats.
- Very low VOC.
- Optifire®+ unique traceability identifier.
- Certifire CF5420.
-
Nullifire SC802 provides up to 60 minutes fire resistance to ‘I’ section beams, columns, hollow section columns and cellular beams. Limited 90-minute protection is also available. SC802 can be used on steel, cast iron and galvanised steel.
Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application.
Safety data sheet must be read and understood before use.
Hours of Work
Project Date
Surface Area
Apply on
Material