
Hours of Work
Project Date
Surface Area
Apply on
Material
About Harmony 1 | Tilal Al Ghaf
In September 2023, Ibtikar Fire Proofing completed 1,500 m² of fire protection on the structural steel of Harmony 1 at Tilal Al Ghaf in Tilal Al Ghaf, Dubai, using Nullifire SC804 water-based intumescent coating.
At Harmony 1, a family-focused community development, the steel elements needed thin-film protection that would stay neat under paint while meeting Dubai Civil Defence requirements. The coating was applied by our trained crews to the manufacturer’s specification and verified with dry film thickness checks before handover to the main contractor.
Fire Proofing Material: Nullifire SC804 Intumescent Steel Coating
Nullifire SC804 Intumescent steel coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC804 contains no substances of very high concern.
![]()
![]()
- Ultra Low VOC.
- Competitive loadings.
- Compatible with a wide range of primers and topcoats.
- Easy to apply, with excellent aesthetics.
- Optifire®+ unique traceability identifier.
- Certifire CF5929.
- 3 months without topcoat once fully dried (see Environmental Resistance section)
![]()
-
Nullifire SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 120 minutes protection is also available. SC804 can be used on steel, cast iron and galvanised steel.
Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application.
Safety data sheet must be read and understood before use.
Hours of Work
Project Date
Surface Area
Apply on
Material







