Fire protective coating for cable trays and bundles — stops flame spreading along the run and keeps essential circuits live, applied by our certified crews to UAE Civil Defense standard.
Approved
Mechanism
Cable protective coating is a fire-resistive layer applied over installed cables and trays. It does two separate jobs: it stops a fire travelling along the cable run as if it were a fuse, and on tested systems it keeps essential circuits energised long enough for alarms, pumps and smoke control to do their work.
Specification
| Circuit integrity | Typically specified for | Relative coating build |
|---|---|---|
| 30minutes | Secondary circuits and general runs crossing a fire compartment | Lowest |
| 60minutes | Fire alarm, emergency lighting and evacuation systems | Moderate |
| 120minutes | Fire pumps, smoke control and firefighting lifts | High |
| 180minutes | Tunnels, substations and critical process control, where specified | Maximum |
Circuit integrity is tested to UL 2196 or ASTM E1725, flame spread to IEEE 1202 or IEC 60332-3 — and flame spread is a pass, not a duration. Build shown is relative, and a coated cable must be derated for ampacity. Send us your cable schedule and we will return the system, the thickness and the certificate.
Range
Thin-film coating that expands under heat to insulate steel and preserve its load-bearing strength, up to 120 minutes of fire resistance.
Durable spray-applied protection designed for columns, beams and heavy structural steel sections.
Fire-resistant barrier for cable trays that stops flame spread and keeps critical circuits running during an emergency.
Chemical treatment that slows combustion and preserves wood's natural look, with up to 60 minutes of added fire resistance.
Fast-curing, solvent-based intumescent system suited for exposed steel and demanding project timelines.
High-build epoxy intumescent system built for offshore, marine and heavy-duty industrial environments.
Chemical treatment for curtains, upholstery and soft furnishings to meet fire safety codes in commercial fit-outs.
Certified fireproofing paints, mortars and accessories supplied and applied to spec for steel, cable and timber protection projects.
On site
Each stage carries a hold point — work does not proceed until the previous stage is signed off. Derating is settled first for a reason: a coated run that was never derated is a problem discovered under load months later, not at inspection.
Applications
Anywhere a cable run crosses a fire compartment, or feeds something that has to keep working while the building is being evacuated.
Portfolio
A record of steel protected, inspections passed, and deadlines met across the Emirates.
Why us
Manufacturer-trained crews using our own spray equipment. The people on your site are ours, not subcontracted labour.
Offices in Dubai, Abu Dhabi, Sharjah, Ras Al Khaimah and Umm Al Quwain — plus a Saudi operation, so we mobilise across the region without travel loading the price.
Dubai, Abu Dhabi and Sharjah Civil Defence, plus ADNOC, CMW, PGC and Tawazun. See our approvals
Dry film thickness recorded member by member, issued with material certificates and test reports, ready for authority submission.
